The method of cleaning a sliding concrete mixer mainly includes the following steps:
Cleaning with water and stones: After the mixer is stopped, pour water and stones into the mixing drum, let the mixer run for 10-15 minutes for cleaning, and then remove the water and stones completely. This method is suitable for general cleaning needs.
Use household cleaning agents for cleaning: For dirty or greasy mixers, prepare baking soda, dishwashing detergent, white vinegar, and warm water. Add an appropriate amount of baking soda, dishwashing detergent, and white vinegar to warm water, then pour it into the blender. Start the blender and let the blades fully stir the mixture to achieve the cleaning effect. This method utilizes the cleaning power of baking soda, the degreasing ability of dishwashing detergent, and the bactericidal and cleaning effects of white vinegar.
Daily maintenance and upkeep: Regularly perform maintenance and upkeep operations on the items specified in the maintenance program, such as cleaning, lubrication, and refueling. This includes checking if the controller is intact, cleaning the mixer drum with warm water after the end of the cold season, and draining any accumulated water from the water pump, tank, and pipes to prevent equipment damage.
Entering the mixing drum for cleaning: If you need to enter the mixing drum for cleaning, you should first cut off the power and remove the fuse, and lock the switch box to ensure safety







